Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

Press release
13.09.2018  |  8679x
Share this item

AZO Lump breaker for crushing of agglomerates

AZO at IBA 2018

The AZO lump breaker is used for crushing and milling of bulk materials with a tendency to form agglomerates, clods and lumps. The sturdy but compact design of the lump breaker, take care for a reliable and gentle crushing of clods and lumps. This unit is designed energy-saving and with low wear. It is available in various construction materials and surface finishings. Due to the pharmaceutical design, it can be dismantled without tools and complies with highest requirements to hygiene and cleaning.

The AZO lump breaker consists of a sturdy housing with inlet and outlet flanges, crushing device and a laterally mounted gear motor. By means of an optional extraction device the shaft including screen and the gear motor can be extracted from the housing with low effort. The unit is available with the construction material no. 1.4301 or 1.4404 and various surface finishings including electrolytic polish.

Company information

More items

AZO feeding hopper in hygienic design  AZO auf der IBA 2018
AZO feeding hopper in hygienic design
AZO auf der IBA 2018 The hygienic design feeding hopper serves to feed bulk solids in powdered and granular form into closed materials handling systems, especially in areas calling for the highest standards in hygiene. Products can be fed from sacks, boxes, barrels or similar receptacles. The feeding hopper is available in two different grades of stainless steel and, depending on the surface finish, has surface roughness of < 0.6 µm or < 0.8 µm. The radii on the inside of the feeding hopper are greater than 50 mm and can be cleaned leaving no residue at all. Wet cleaning is done via an integral spray head. The gasket used for the lid can easily be replaced when needed, as it is not attached with adhesive. It is composed of silicone and is metal detectable. The feeding hopper is suitable for use in areas in zones 22 and 2 where there is a risk of explosion. To avoid dust escaping when sacks are discharged, an aspiration process can be connected that starts when the lid of the feeding
12.09.2018  |  8087x  |  Press release  | 
AZO at IBA 2018 Modular big bag discharge station – cost-effective and versatile
AZO at IBA 2018
Modular big bag discharge station – cost-effective and versatile Flexible bulk materials receptacles such as big bags have become firmly established for handling powders in a variety of branches. They have clear advantages over sacks when it comes to transporting and storing bulk materials. They are environmentally friendly, require less operating staff and storage space and reduce costs for transport and processes. AZO big bag discharge stations make it possible to discharge big bags without generating excess dust and to feed products reliably into the closed production plant. To improve efficiency and reduce costs even further, AZO has developed a modular concept for a big bag discharge station. The required components such as frame, support beams, chain hoist, discharging aids, big bag docking system, buffer bin and discharging unit can be chosen from a “construction set”, depending on the requirements. The entire discharge station can be configured to suit needs without outlay for design, which has a very positive effect
11.09.2018  |  8524x  |  Press release  | 
AZO ManDos  ManDos – operator-guided manual weighing centre for the provision of micro quantities
AZO ManDos
ManDos – operator-guided manual weighing centre for the provision of micro quantities The operator-guided manual weighing centre ManDos is ideal for micro quantities such as flavourings, baking agents, emulsifiers, dyes and other ingredients that cannot be fully automated in a profitable manner owing to their consistency (physical properties) or production need (quantity and frequency). However, it is these micro quantities in particular that have a crucial impact on the recipe, meaning that proper control and documentation are essential during their addition to the manufacturing process. ManDos is ideal for the following situations: • Low batch frequency • Raw materials that are not suitable for automation • Frequent changes of ingredients • A large number of components • Limited investment resources • Requirement for end-to-end documentation Our expertise – benefiting you! ManDos can be used as a stand-alone system, but can also be expanded to a comprehensive, networked batch production system with host interface. The logical
10.09.2018  |  8869x  |  Press release  | 
AZO®LDOS – Präzise Dosierung flüssiger Rohstoffe

This item is only available in German
06.09.2018  |  6748x  |  Press release
AZO®WMD – Precise, exact, with perfect temperature control AZO at IBA 2018
AZO®WMD – Precise, exact, with perfect temperature control
AZO at IBA 2018 AZO®WMD – the ideal temperature-control and dosing unit for process water. An attractive innovation from AZO for bakery businesses. Does your equipment supply hot and cold water, but you need a temperature somewhere in between? The AZO®WMD water mixing and dosing unit supplies process water at the perfect temperature for your dough production, in the required quantity, just when you need it. Process water is valuable. Because the intake temperature is immediately and automatically considered and compensated for when the WMD starts up, there is no advance flow at all. The setpoint values are achieved with excellent precision thanks to continuous monitoring of the process parameters – pressure and temperature – and of the flow quantities for hot and cold water at the inlet of the unit. The AZO control installed in the unit records all process data at the inlet and outlet of the AZO®WMD. Digital displays provide information about the current process status.
05.09.2018  |  8346x  |  Press release  | 
AZO dough plants AZO at IBA 2018
AZO dough plants
AZO at IBA 2018 The new AZO DL (dough line) modular line from AZO takes a big step towards addressing the frequently expressed wish of customers for complete solutions for handling both solids and liquids in bakeries. With years of experience in adding, dosing and weighing powdered substances and bulk materials, together with expertise in handling liquids, AZO can offer customers a “carefree package” without troublesome interfaces. Thanks to the modular design, the dough mixers, which are designed for medium- and large-scale bakeries, are highly versatile and can be engineered for different types of dough as required. Owing to the robust execution, dough yields upwards of 180 (solid content up to 55%) can be processed in volumes of between 400 and 9000 l without difficulty. The addition of finely dispersed water and flour, in conjunction with the specially developed agitators, ensures these are worked gently into the dough and distributed uniformly over the course of the entire
05.09.2018  |  8195x  |  Press release  | 
AZO COMPONENTER® Step Automatic weighing of micro components AZO at the IBA 2018
AZO COMPONENTER® Step Automatic weighing of micro components
AZO at the IBA 2018 Until now, minor and micro components had to be weighed manually, thus entailing risks and potential errors. These grow with the number of components and batches, and with the required weighing and metering accuracy. This has an adverse effect on product safety and quality overall. Manual operations may under certain circumstances require a large number of staff and demands a high degree of concentration from them during weighing processes. They are to some extent exposed to relatively high amounts of dust. Occasionally automatic dosing units are also employed, which meter the ingredients onto a weigh belt feeder. However these require substantial outlay for cleaning; neither can they prevent cross-contamination. In order to resolve the problems described above, AZO is expanding its already extensive portfolio for automation of minor and micro quantities with the AZO COMPONENTER® Step. This system makes it possible to weigh minor and micro components automatically
04.09.2018  |  10565x  |  Product news  | 
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked