Poeth Z- or C-conveyor ideal when height is limited
With the Z conveyor in the C design, an elevation step can be achieved relatively easily. The conveyor is also suitable for very watery products.
It is often the case that an additional screening stage or metal detection stage needs to be incorporated into an existing situation. However, there is not enough height. With the Z conveyor in the C design, an elevation step can be achieved relatively easily. The conveyor is also suitable for very watery products.
Application
The Incline flight conveyor is designed for handling a variety of dry, free flowing bulk materials (also suitable for fine powders) either horizontally, on an incline or a combination of both.
Operation
The plastic flights are carried by a chain, all contained in a standard trough. Bulk Materials flow smoothly and gently. All materials are carried “en masse” without tumbling, thereby keeping material agitation and friction to a minimum. Particle degradation and separation are also minimized.
Construction
- standard intermediate sections.
- Bend sections 15°,30°,45°,60°,75° and 90°
- Sprocket-idler return system.
- All-steel chain
- Replaceable plastic flights.
- Drive equipment.
- (By-pass) Inlet.
- Discharge outlet.
- Efficient and simply designed.
- Totally enclosed.
Benefits
- Gentle material handling.
- Custom-built to suit individual requirements.
- Up to 150 ton/h.
Optional extras
- Stainless steel construction.
- Abrasion resistant bottoms or bolted side liner packages.
- By-pass inlet.
- Discharge gates.
- Overflow indicator.
FOCUS
Continue reading
How to tame recalcitrant ingredients withtechnological processesThe benefits of composite silos and tanks in the food industryCeramic raw materials from the pulsating hot gas streamExploring new ways to produce cosmetic pigments
Post your articleMore articles
